The physical construction of a transformer is crucial to its proper operation. It must be made using laminated steel sheets that are separated by an air-gap. The laminations help to minimize the resis...
A Shunt Assembly is a component of a magnetic switch. It is usually made of a printed circuit board with terminals for connecting wires to rails. The PC board has several inductors and capacitors moun...
Transformers are made up of a number of different components. These components include the tank, which protects the windings and core of the transformer. It also provides a space for the transformer's...
In the selection of manganese copper resistors, different materials mean different resistances, and what are the advantages of their materials? The selection of commonly used materials are silver, cop...
The 80A latching relay is a high-frequency electronic switch that can be used in a variety of applications. Its high-frequency operation makes it suitable for use in energy-saving appliances and smart...
A current transformer is a device that converts the direct current flowing in an electrical circuit into alternating current, which is then used to produce a regulated voltage. It consists of a lamin...
A shunt is a small electrical device that carries a current between two points. The shunt is often connected to a single-phase meter. Unlike a meter, a shunt does not carry the same amount of current...
Using meters with copper shunts is an excellent way to accurately measure current. The meter must be connected directly to the shunt to ensure accurate readings. Using a wire length in series can lead...
A current transformer is a device that changes the direction of the electric current. Its primary winding consists of a copper wire that passes through a silicon steel ring. The secondary winding, als...
What is the purpose of a Copper Pillar Assembly? A Copper Pillar is an architectural element that supports the entire roof of a building. In many cases, this structure is comprised of several pillars,...
When considering Meters Manganin Shunts, there are many factors that need to be considered before choosing one. These include the size, design, and mounting location. Shunts should be installed in an ...
Shunt assemblies are a common way to protect sensitive electrical equipment. The shunt resistors are low-ohmic devices that carry a current between two points. These devices are connected in parallel ...
Haiyan Weijia Electric Technology Co., Ltd. was established in 2008 with a registered capital of 20 million yuan, the company covers an area of 13 acres, with a total construction area about 12,000 square meters and more than 300 employees.
Contact us
Login China Manganin Shunts Manufacturers
English